Structural Turnout Gear for Fire Departments Wholesale Supply

Structural Turnout Gear for Fire Departments 

Wholesale Supply

When firefighters enter a burning building, structural turnout gear is the only barrier against lethal heat and flame. This turnout gear combines a 4-layer thermal system, Nomex IIIA shell and DRD rescue device for wholesale supply.

Table of Contents
What Are Structural Firefighting Turnout Gear?
Key Features of Our Structural Firefighting Turnout Gear
Certifications and Safety Standards
Sizing Guide and Customization Options
Comparison: Nomex vs PBI vs Standard Aramid
Applications: Who Uses Structural Firefighting Turnout Gear?
Bulk Ordering,structural turnout gearing
Frequently Asked Questions

Every component of our structural turnout gear is purpose-built for the structural firefighting environment.

The outer shell is available in Nomex IIIA for proven durability and cost-effectiveness, or PBI Matrix for maximum thermal stability and char resistance.

Both options are paired with a waterproof barrier, thermal insulation, and comfortable inner liner — creating a 4-layer system that balances heat protection with breathability and mobility.

The integrated DRD drag rescue device provides a fast, reliable method for rescuing a downed firefighter — a reinforced handle system deployed from the collar area, rated for the weight of a fully equipped firefighter.

Reinforced knees, elbows, and shoulders use additional layers and bar tacking at high-stress points, while strategically placed tool pockets keep essential equipment accessible without restricting movement.

Every seam uses Kevlar thread for maximum strength and heat resistance.

Our turnout gear serves city and county fire departments, industrial fire brigades, airport rescue and firefighting (ARFF) teams, training academies, and volunteer fire departments worldwide.

Each configuration can be customized with department logos, specific color requirements, and pocket layouts to match operational needs.

We work with procurement officers and fire chiefs to ensure every order meets department specifications and certification requirements.

Choosing the right turnout gear means balancing thermal protection, durability, comfort, and budget.

Nomex IIIA offers an excellent balance of performance and value for most departments, while PBI Matrix provides superior thermal stability for high-heat environments.

Our GA10 and EN469 certification ensures every set meets recognized safety standards, including NFPA 1971.

Explore the detailed sections below to find the configuration that matches your department's operational requirements and budget.

What Are Structural Firefighting Turnout Gear?

Definition and Core Components of Turnout Gear

Structural firefighting turnout gear — also called bunker gear or firefighter PPE — is the complete protective ensemble worn by firefighters during interior structural fire attacks.

It consists of a coat and pants constructed from multiple layers of flame-resistant materials, designed to protect against radiant heat, direct flame contact, hot water and steam, and physical abrasion.

A complete set typically includes the coat, pants, and matching helmet, gloves, and boots as separate components.

The term "turnout gear" originated from the practice of firefighters keeping their boots and pants at the foot of their bed, ready to "turn out" at a moment's notice.

Modern turnout gear has evolved far beyond those early leather and wool coats, incorporating advanced aramid fibers, waterproof barriers, and thermal insulations that provide protection that early firefighters could never have imagined.

Today's gear must balance protection with mobility, because a firefighter who cannot move effectively is also at risk.

Proper fit and mobility are critical for firefighter safety. Our turnout gear offers both standard and athletic cuts to accommodate different body types and movement preferences, ensuring firefighters can perform essential tasks without restriction.

4-Layer Thermal Protection System Explained

Our turnout gear uses a 4-layer thermal protection system, each layer serving a specific function in the overall protection chain.

The outer shell is the first line of defense against direct flame, abrasion, and external contaminants — available in Nomex IIIA or PBI Matrix.

The moisture barrier prevents hot water, steam, and other liquids from penetrating to the inner layers, while allowing water vapor from sweat to escape.

The thermal insulation provides the primary insulation against heat transfer, typically constructed from multiple layers of aramid batting. The inner liner provides comfort and moisture management against the firefighter's skin.

This 4-layer construction is critical because no single material can provide all the required properties.

The outer shell must be tough and flame-resistant, the moisture barrier must be waterproof but breathable, the thermal liner must trap insulating air, and the inner liner must be comfortable against skin.

Each layer is independently tested and certified, and the combined system must meet TPP (Thermal Protective Performance) and THL (Total Heat Loss) requirements set by standards bodies like NFPA 1971 and EN469.

This configuration is engineered for the specific demands of structural firefighting, balancing thermal protection with mobility and durability for wholesale department supply.

Key Features of Our Structural Firefighting Turnout Gear

Nomex IIIA and PBI Matrix Outer Shell Options

The outer shell is the most visible and critical component of turnout gear, and we offer two proven material options to match different operational requirements and budgets.

Nomex IIIA is a meta-aramid fiber produced by DuPont, known for its excellent balance of thermal stability, durability, and cost-effectiveness.

Nomex IIIA does not melt, drip, or support combustion in air, and it maintains its protective properties after repeated exposure to heat and laundering.

It is the most widely used outer shell fabric in firefighting turnout gear worldwide.

This configuration is engineered for the specific demands of structural firefighting, balancing thermal protection with mobility and durability for wholesale department supply.

PBI Matrix is a premium blend of polybenzimidazole (PBI) fiber and aramid, offering superior thermal stability and char resistance compared to standard Nomex.

PBI fibers do not burn, melt, or drip, and they retain their flexibility even after exposure to extreme heat — a property that is critical because a stiff, brittle outer shell can restrict movement and tear during rescue operations.

PBI Matrix is the preferred choice for departments that frequently encounter high-heat environments, such as industrial firefighting and aircraft rescue.

Both outer shell options are available in standard navy blue, with custom colors available for department-specific requirements.

DRD Drag Rescue Device and Harness Compatibility

The DRD (Drag Rescue Device) is an integrated rescue system that allows a downed firefighter to be quickly dragged to safety by a single rescuer.

The system consists of a reinforced strap housed in the collar area of the coat, deployed by pulling a handle and looping it under the firefighter's arms.

The DRD is rated for the weight of a fully equipped firefighter (including SCBA, tools, and accumulated water weight), and it provides a secure, controlled method for horizontal drag rescue in low-visibility or confined-space environments.

Thermal Protective Performance (TPP) testing measures how long a firefighter has before a second-degree burn occurs. Our 4-layer system consistently achieves TPP ratings above 35, providing critical escape time in flashover conditions.

The coat length and cut are optimized to allow harness straps to sit properly, and the DRD system can be deployed even when a harness is worn.

Reinforced webbing at the shoulder and waist areas provides additional attachment points for tools and equipment, while maintaining the structural integrity of the garment.

Every turnout gear set undergoes rigorous quality inspection before shipping. Our quality control team checks stitching, hardware placement, fabric consistency, and sizing accuracy, ensuring every unit meets GA10 and EN469 standards for wholesale bulk orders.

Reinforced Knees, Elbows and Tool Pocket Layout

High-stress areas receive additional reinforcement to extend gear service life. Knees feature additional layers of outer shell fabric and thermal liner, with optional knee pad pockets for insertable protection.

Elbows and shoulders use bar tacking and additional stitching at all stress points, with reinforced gussets that allow full range of motion without binding.

All seams use Kevlar thread, which provides superior heat resistance and tensile strength compared to standard sewing thread — critical because seam failure is one of the most common modes of gear degradation.

All our structural firefighting turnout gear is independently tested and certified to meet GA10, EN469, and NFPA 1971 standards, ensuring consistent quality and protection for every wholesale bulk order.

The tool pocket layout is designed based on input from working firefighters, providing accessible storage for essential tools without restricting movement.

Standard configurations include radio pocket, flashlight pocket, tool/toggle pocket, and pen/pencil pocket, with custom layouts available for department-specific requirements.

Pocket placement is optimized for accessibility while wearing gloves and SCBA, and all pockets use hook-and-loop closures with reinforced attachment points. Drainage grommets in lower pockets prevent water accumulation.

Certifications and Safety Standards

GA10-2014 Chinese Firefighter Uniform Standard

Our turnout gear meets the requirements of GA10-2014, the Chinese national standard for firefighter protective clothing.

This standard specifies requirements for material performance, construction, design, and testing of structural firefighting turnout gear used by Chinese fire departments.

GA10-2014 covers both the coat and pants components, with specific requirements for outer shell flame resistance, thermal insulation performance, seam strength, and dimensional stability after heat exposure.

The standard also requires specific labeling and information to be provided with each garment. Reference: CEN European Committee for Standardization (EN 469).

This configuration is engineered for the specific demands of structural firefighting, balancing thermal protection with mobility and durability for wholesale department supply.

GA10-2014 testing includes flame resistance testing (vertical flame test), thermal protective performance (TPP) testing, heat resistance testing, tear strength testing, and water vapor transmission testing.

Each batch of material is tested before production, and finished garments undergo additional quality inspection before shipment.

For departments requiring GA10 certification, we provide test reports and certification documentation with each order. Custom configurations can also be certified to GA10 standards upon request, with testing conducted by recognized third-party laboratories.

EN469 European Firefighter Protective Clothing Standard

For departments requiring European certification, our turnout gear meets the requirements of EN469, the European standard for protective clothing for firefighters.

EN469 specifies minimum performance requirements for protective clothing used in structural firefighting and related activities, covering both the coat and trousers.

The standard defines two performance levels (Level 1 and Level 2) for various properties, including flame resistance, heat protection (convective and radiant), water penetration resistance, water vapor resistance, and mechanical properties.

EN469 also includes requirements for ergonomic design, visibility, and marking.

EN469 testing is conducted according to specific European test methods, including EN ISO 15025 (flame resistance), EN ISO 11612 (heat and flame), EN 343 (water penetration and vapor resistance), and EN ISO 13934 (tensile strength).

Our gear is designed to meet Level 2 performance for the most critical properties, providing maximum protection for firefighters operating in high-risk environments.

For export orders requiring CE marking and EN469 certification, we provide the necessary technical documentation and test reports. More information about EN469 requirements can be found through the CEN-CENELEC standards body.

Commercial building fires present unique challenges with long hose stretches, multiple floors, and complex layouts.

Our turnout gear is designed for sustained interior operations in these environments, with reinforced knees and extended coat tails for added protection.

TPP Thermal Protective Performance and THL Ratings

Two of the most important performance metrics for turnout gear are TPP (Thermal Protective Performance) and THL (Total Heat Loss).

TPP measures the gear's ability to protect against combined convective and radiant heat — a higher TPP rating means better thermal protection.

TPP is measured by exposing a composite sample to a controlled heat source and measuring the time until a second-degree burn would occur through the material.

A TPP rating of 35 means the material provides 35 calories/cm² of protection before a second-degree burn occurs.

Our 4-layer system typically achieves TPP ratings of 35-45, depending on the outer shell and thermal liner configuration.

Beyond structural firefighting, our turnout gear is also widely used by airport ARFF teams, industrial fire brigades, and military fire departments requiring certified thermal protection for high-risk operations.

THL (Total Heat Loss) measures the gear's ability to allow heat and moisture from the firefighter's body to escape — a higher THL rating means better breathability and reduced heat stress.

THL is measured by the rate of water vapor transmission through the composite material.

The balance between TPP and THL is critical: gear with very high TPP but low THL may cause firefighters to overheat during prolonged operations, while gear with high THL but low TPP may not provide adequate pNFPA 1971.

Our 4-layer system is engineered to balance both metrics, meeting the requirements of NFPA 1971 (minimum TPP of 35, minimum THL of 205 W/m²) and EN469 Level 2 requirements.

Sizing Guide and Customization Options

How to Measure for Correct Turnout Gear Sizing

Proper sizing is critical for both safety and comfort — turnout gear that is too large can catch on obstacles and restrict movement, while gear that is too small can restrict breathing and movement.

We offer a comprehensive range of sizes from S to 5XL, with both regular and tall/short options available.

To determine the correct size, measure the firefighter's chest circumference (at the fullest part, with arms relaxed at sides), height, waist circumference (at the natural waistline), and inseam (from crotch to floor, barefoot).

These four measurements provide the data needed to select the correct coat and pants size.

This configuration is engineered for the specific demands of structural firefighting, balancing thermal protection with mobility and durability for wholesale department supply.

For departments ordering multiple sets, we recommend creating a sizing roster with each firefighter's measurements, rather than ordering by uniform size assumptions.

Body shapes vary significantly, and two firefighters who wear the same t-shirt size may require different turnout gear sizes due to differences in shoulder width, torso length, and body shape.

We provide sizing charts and measurement guidance with every quote, and our customer service team can assist with sizing questions.

For large orders (50+ sets), we can provide sample sets for fitting evaluation before final production.

Custom sizing for individual firefighters is also available — provide the specific measurements and we will manufacture to fit.

For wholesale department orders, we offer flexible customization options and bulk pricing to meet your specific operational requirements and budget constraints.

Custom Color, Logo and Configuration Options

We offer comprehensive customization options to match department-specific requirements. Custom colors are available beyond standard navy blue — including black, tan, red, and custom color matching for department-specific requirements.

Color customization applies to the outer shell, with reflective trim colors also customizable.

Custom logos can be applied to the chest, back, and sleeves using embroidery or heat transfer methods. Department names, battalion numbers, and individual firefighter names can be added.

Logo placement and size can be customized to match department regulations.

Configuration customization includes pocket layout (number, size, and placement of pockets), coat length (traditional or sport cut), collar style, wristlet design, and pant cut.

Departments can specify which features are standard and which are optional, creating a configuration that matches operational requirements and budget.

For all custom orders, we provide a detailed specification sheet for approval before production begins. Custom orders require a minimum order quantity (MOQ) — please contact us for specific MOQ requirements for your customization needs.

Lead times for custom orders are provided with each quote, as they depend on the complexity of customization and order quantity.

Comparison: Nomex vs PBI vs Standard Aramid

Thermal Performance and Durability Comparison

Choosing the right outer shell material is one of the most important decisions when selecting turnout gear, as it directly impacts thermal protection, durability, and cost.

Nomex IIIA is a meta-aramid fiber that provides excellent thermal stability — it does not melt, drip, or support combustion, and it maintains its protective properties after repeated laundering and heat exposure.

Nomex IIIA has a limiting oxygen index (LOI) of approximately 28-30, meaning it requires an oxygen-rich environment to sustain combustion.

It provides good char resistance and maintains its tensile strength after heat exposure, making it a reliable choice for most structural firefighting applications.

PBI Matrix is a premium blend of PBI (polybenzimidazole) fiber and aramid, offering superior thermal stability compared to Nomex.

PBI has an LOI of approximately 41, significantly higher than Nomex, and it does not burn, melt, or drip even at extreme temperatures.

The key advantage of PBI is its ability to remain flexible after charring — when Nomex chars, it can become brittle and crack, while PBI retains its flexibility and structural integrity.

This property is critical because a brittle outer shell can tear during rescue operations, exposing the firefighter to heat.

PBI Matrix is the preferred choice for high-heat environments such as industrial firefighting, aircraft rescue, and departments that frequently encounter flashover conditions.

Proper sizing ensures maximum protection and mobility. We provide detailed measurement guides and offer custom sizing for department-wide orders.

Our sizing chart covers chest, waist, inseam, and height measurements to ensure every firefighter gets a proper fit.

Comfort, Weight and Cost Comparison

While thermal performance is critical, comfort and weight directly impact firefighter effectiveness and safety.

Gear that is too heavy or uncomfortable can lead to fatigue, reduced mobility, and heat stress — all of which increase risk.

Nomex IIIA is generally lighter and more flexible than PBI Matrix, providing better mobility and reduced fatigue during prolonged operations.

Nomex also tends to be more breathable, contributing to better heat stress management. PBI Matrix is slightly heavier and stiffer, although modern PBI blends have significantly improved flexibility compared to earlier generations.

The weight difference is typically 5-10% between comparable Nomex and PBI configurations.

Cost is another important consideration for department budgets. Nomex IIIA is the more cost-effective option, providing excellent performance at a lower price point.

PBI Matrix is a premium material with a higher cost — typically 30-50% more expensive than Nomex IIIA for comparable configurations.

For departments with limited budgets, Nomex IIIA provides proven protection that meets all major certification standards.

For departments that frequently operate in high-heat environments or have experienced gear failures due to brittleness after heat exposure, the additional cost of PBI Matrix may be justified by the extended service life and superior thermal stability.

Many departments choose a mixed fleet — PBI Matrix for interior attack teams and Nomex IIIA for support and training roles.

This configuration is engineered for the specific demands of structural firefighting, balancing thermal protection with mobility and durability for wholesale department supply.

Related Products in Our Thermal Protection Range: Explore our technical rescue apparels for extrication and vehicle rescue operations, our wildland firefighting suits for brush fire and vegetation fire response, and our complete heat protective clothing range for all thermal hazard scenarios.

For wholesale department orders, we offer flexible customization options and bulk pricing to meet your specific operational requirements and budget constraints.

Proper maintenance extends the service life of structural firefighting turnout gear and keeps crews safe.

Maintenance and Care Tips for Structural Firefighting Turnout Gear

Proper maintenance extends the service life of turnout gear and ensures consistent protection. Departments should establish a regular cleaning and inspection schedule for all gear in service.

After each use, gear should be inspected for damage, contamination, and wear. Outer shell contamination from fireground toxins requires professional cleaning following NFPA 1851 guidelines.

Storage matters. Gear should dry completely before storage to prevent mold and mildew growth. Hang gear in well-ventilated areas away from direct sunlight and chemical fumes.

Velcro closures, zippers, and reflective trim need periodic checks. Replace worn components promptly to maintain full protective capability. Record all inspections and repairs for compliance tracking.

How to Choose the Right Structural Firefighting Turnout Gear

Selecting turnout gear requires balancing protection, comfort, and budget. Consider your department's primary response types — structural firefighting, technical rescue, or wildland interface operations.

Outer shell material is the first decision. Nomex IIIA offers proven durability at moderate cost. PBI Matrix provides superior thermal stability for high-heat environments. Kevlar blends enhance abrasion resistance.

Fit and mobility directly affect firefighter safety and performance. Gear should allow full range of motion for climbing, crawling, and tool operation. Try on multiple sizes and configurations before committing.

Factor in total cost of ownership, not just initial price. Quality gear with proper maintenance can serve 10 years or more. Budget for regular cleaning, repairs, and replacement cycles.

Applications: Who Uses Structural Firefighting Turnout Gear?

City and County Fire Departments

City and county fire departments are the primary users of structural firefighting turnout gear, and our gear is designed to meet the demanding requirements of municipal firefighting operations.

These departments respond to a wide range of incidents — structure fires, vehicle fires, hazardous materials incidents, technical rescues, and medical emergencies — and their turnout gear must perform reliably across all these scenarios.

Our 4-layer thermal protection system provides the heat protection needed for interior structural fire attack, while the ergonomic design and mobility features allow firefighters to perform technical rescue tasks without restriction.

The DRD system is particularly valuable for municipal departments, as rapid rescue of a downed firefighter is a critical capability in the dynamic environment of a structure fire.

We maintain substantial inventory for standard configurations and offer flexible production scheduling for custom department orders, ensuring reliable delivery timelines for wholesale buyers worldwide.

Industrial Fire Brigades and Airport Rescue

Industrial fire brigades — found at refineries, chemical plants, manufacturing facilities, and power plants — face unique hazards that demand specialized turnout gear.

These environments often involve higher heat fluxes, chemical exposures, and confined spaces, requiring gear with superior thermal stability and chemical resistance.

Our PBI Matrix outer shell option is particularly well-suited for industrial applications, providing maximum thermal stability and char resistance for high-heat environments.

Industrial brigades also benefit from our customization options, including specific pocket layouts for industrial tools, custom colors for facility identification, and chemical-resistant moisture barrier options.

Airport Rescue and Firefighting (ARFF) teams operate in one of the most demanding firefighting environments, responding to aircraft incidents involving jet fuel fires with extremely high heat release rates.

ARFF gear must provide maximum thermal protection while allowing the mobility needed for rapid response and aircraft access.

Our turnout gear with PBI Matrix outer shell and 3-layer thermal liner provides the thermal protection needed for ARFF operations, while the sport cut option provides enhanced mobility for climbing into aircraft and operating in confined spaces.

ARFF teams also benefit from high-visibility trim options and custom color configurations for airport-specific identification requirements.

Training Academies and Volunteer Fire Departments

Firefighter training academies require turnout gear that can withstand repeated use in live-fire training scenarios, where gear is exposed to heat and abrasion on a daily basis.

Our Nomex IIIA configuration provides an excellent balance of durability and cost-effectiveness for training applications, with reinforced high-stress areas that extend service life even under heavy training use.

Training academies also benefit from our bulk pricing and standardized configurations, which simplify fleet management and replacement.

We can provide gear with training-specific modifications, such as added wear patches and simplified pocket layouts, to optimize for training use.

Nomex IIIA offers excellent value with proven durability, while PBI Matrix provides superior thermal stability and char resistance for high-heat environments.

Both options meet GA10 and EN469 standards, allowing departments to choose based on budget and operational requirements.

Volunteer fire departments often operate with limited budgets but still require gear that meets the same safety standards as career departments.

Our Nomex IIIA configuration provides certified protection at a price point that is accessible for volunteer department budgets, without compromising on safety.

We offer flexible payment terms and bulk pricing for volunteer departments, and our customer service team can assist with grant applications and funding justification documentation.

Volunteer departments also benefit from our sizing flexibility, as volunteer firefighters often have more diverse body types than career departments.

We provide the same level of certification and quality assurance for volunteer department orders as for large municipal orders.

For wholesale department orders, we offer flexible customization options and bulk pricing to meet your specific operational requirements and budget constraints.

Bulk Ordering, MOQ and Wholesale Pricing

Wholesale Pricing Tiers and Volume Discounts

We offer competitive wholesale pricing for bulk orders, with volume discounts that make our turnout gear accessible for departments of all sizes.

Pricing is structured in tiers based on order quantity, with larger orders receiving progressively better pricing.

Our standard pricing tiers begin at 10 sets, with additional discount tiers at 50 sets, 100 sets, and 500 sets.

For orders exceeding 500 sets, we provide custom pricing based on the specific configuration and delivery schedule.

Specific pricing details are provided upon request, as they depend on configuration, customization, and order quantity.

additionally volume discounts, we offer package pricing for complete ensembles (coat, pants, and matching accessories), which can provide additional savings compared to ordering components separately.

Departments can also save by standardizing configurations across the fleet — uniform configurations reduce production costs and simplify replacement ordering.

We provide detailed cost-benefit analysis for departments evaluating different configuration options, helping them find the balance between features and budget.

For government and institutional buyers, we can provide pricing in the format required for procurement processes, including line-item pricing, delivery schedules, and warranty information.

All prices are quoted in USD, with other currencies available upon request.

MOQ, Lead Time and Custom Order Process

Our minimum order quantity (MOQ) for standard configuration turnout gear is 10 sets.

For custom configurations (custom colors, custom logos, custom pocket layouts), the MOQ may be higher — please contact us for specific MOQ requirements for your customization needs.

Smaller orders for sample sets or individual replacements may be possible depending on current production capacity — please inquire.

We understand that some departments may need to order smaller quantities due to budget cycles or replacement needs, and we work with customers to find solutions that meet their requirements.

Lead times depend on order quantity, configuration complexity, and current production capacity.

Larger orders (100+ sets) may require 45-60 days. Custom configuration orders may require additional time for sample approval and production setup.

All lead times are provided as estimates with each quotation, and we provide regular production updates for large orders.

Our custom order process follows these steps. First, requirements consultation — we work with you to define specifications and confirm fabric choices.

Second, quotation — we provide detailed pricing based on quantity, customization level, and delivery timeline.

Third, sample production — we create prototype samples for your review and approval before mass production.

Fourth, bulk manufacturing — we produce your order with strict quality control at every stage.

Finally, inspection and shipping — we conduct final QC and arrange delivery to your specified location.

Payment terms are typically T/T 30% deposit with order confirmation, 70% balance before shipment. Other payment terms may be available for established customers and large orders.

This configuration is engineered for the specific demands of structural firefighting, balancing thermal protection with mobility and durability for wholesale department supply.

Our custom order process includes design consultation, sample approval, bulk production, rigorous quality inspection, and secure packaging, ensuring every department receives turnout gear tailored to their specific requirements.

Related Products in Our Thermal Protection Line:

• Technical Rescue Suit for Urban Search and Rescue
• Wildland Firefighting Shirt for Forest Fire Crews
• Heat Protective Clothing Full Category Aggregation Page

Q: What is the lifespan of structural firefighting turnout gear?

This FAQ section provides answers to the most common questions from fire departments and wholesale procurement teams, covering material selection, certification requirements, sizing guidance, and the bulk ordering process for structural firefighter turnout gear.

A: Turnout gear should be cleaned regularly according to NFPA 1851 standards. After each use, gear should be inspected for damage and contaminants. Routine cleaning can be done with a soft brush and mild detergent, by rinsing. For heavy contamination, gear should be professionally cleaned using an NFPA 1851-compliant cleaning program. Gear should never be dry-cleaned or cleaned with bleach or harsh chemicals. After cleaning, gear should be air-dried in a well-ventilated area away from direct sunlight and heat sources. Gear should be stored in a clean, dry, well-ventilated area, never stored while wet or contaminated.

A: Minor repairs — such as replacing hook-and-loop fasteners, repairing small tears, or replacing reflective trim — can be performed by qualified personnel using matching materials. However, any repair that involves the outer shell, moisture barrier, or thermal liner must be performed by a certified repair facility or the manufacturer, because improper repair can compromise the protective properties of the gear. Alterations for fit should be performed before initial issue, and gear should not be altered after it has been put into service. We provide repair guidance and can refer customers to certified repair facilities. Damaged gear should be removed from service immediately and inspected by a qualified person.

These frequently asked questions address the most common inquiries from fire departments and wholesale procurement teams, covering material selection between Nomex IIIA and PBI Matrix, certification requirements, sizing guidance, and the bulk ordering process for structural firefighter turnout gear.

A: Turnout gear (also called bunker gear) is designed specifically for structural firefighting, providing maximum thermal protection for interior fire attack. It typically has a 4-layer construction, heavier weight, and features like DRD and reinforced knees. Fire rescue suits (also called technical rescue suits or rescue coveralls) are designed for technical rescue operations — such as vehicle extrication, urban search and rescue (USAR), and confined space rescue — where mobility and dexterity are more important than maximum thermal protection. Rescue suits are typically lighter, more flexible, and may have different pocket layouts for rescue tools. Some departments use both types of gear, selecting the appropriate gear based on the incident type. Our product line includes both structural turnout gear and technical rescue suits.

A: Yes, we offer comprehensive customization options. Department logos can be applied to the chest, back, and sleeves using embroidery or heat transfer. Custom colors are available beyond standard navy blue, including black, tan, red, and custom color matching. Individual firefighter names and battalion numbers can also be added. Customization requires a minimum order quantity — please contact us for specific MOQ requirements. We provide digital proofs for approval before production begins on custom orders.

A: Our turnout gear is certified to GA10-2014 (Chinese standard) and EN469 Level 2 (European standard). We can also provide configurations that meet NFPA 1971 requirements upon request. Each order includes certification documentation and test reports. For specific certification requirements, please contact us with your standards and we will confirm availability and provide relevant documentation.

Ready to equip your department with certified structural firefighting turnout gear? 

Contact us for a detailed quotation with bulk pricing and customization options.

For wholesale department orders and government procurement, contact our team for a detailed quotation, custom specification consultation, and sample evaluation. We supply certified structural firefighter turnout gear to fire departments and industrial brigades worldwide.